Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.


↳ QTRS
  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.

Using Dependency Pairs [1,15] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
U721(X1, active(X2), X3) → U721(X1, X2, X3)
U521(mark(X1), X2, X3) → U521(X1, X2, X3)
MARK(U11(X1, X2)) → MARK(X1)
U411(X1, mark(X2)) → U411(X1, X2)
ACTIVE(x(N, 0)) → U611(isNat(N))
ACTIVE(U32(tt)) → MARK(tt)
U111(X1, mark(X2)) → U111(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
ACTIVE(plus(N, s(M))) → ISNAT(M)
U511(X1, X2, active(X3)) → U511(X1, X2, X3)
U121(active(X)) → U121(X)
X(X1, mark(X2)) → X(X1, X2)
ACTIVE(U52(tt, M, N)) → PLUS(N, M)
U521(X1, X2, active(X3)) → U521(X1, X2, X3)
ACTIVE(U72(tt, M, N)) → PLUS(x(N, M), N)
U111(X1, active(X2)) → U111(X1, X2)
ACTIVE(U11(tt, V2)) → U121(isNat(V2))
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)
ACTIVE(isNat(x(V1, V2))) → U311(isNat(V1), V2)
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U32(X)) → MARK(X)
X(active(X1), X2) → X(X1, X2)
MARK(x(X1, X2)) → MARK(X2)
MARK(U41(X1, X2)) → MARK(X1)
U321(mark(X)) → U321(X)
ACTIVE(plus(N, s(M))) → U511(isNat(M), M, N)
ACTIVE(isNat(x(V1, V2))) → ISNAT(V1)
U711(X1, X2, active(X3)) → U711(X1, X2, X3)
U521(X1, mark(X2), X3) → U521(X1, X2, X3)
MARK(U72(X1, X2, X3)) → U721(mark(X1), X2, X3)
ACTIVE(U72(tt, M, N)) → X(N, M)
MARK(s(X)) → MARK(X)
ACTIVE(plus(N, 0)) → ISNAT(N)
ACTIVE(U31(tt, V2)) → ISNAT(V2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
U521(X1, active(X2), X3) → U521(X1, X2, X3)
MARK(U41(X1, X2)) → U411(mark(X1), X2)
U511(X1, active(X2), X3) → U511(X1, X2, X3)
MARK(plus(X1, X2)) → MARK(X2)
MARK(U11(X1, X2)) → U111(mark(X1), X2)
X(mark(X1), X2) → X(X1, X2)
ACTIVE(isNat(0)) → MARK(tt)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(U71(X1, X2, X3)) → U711(mark(X1), X2, X3)
ACTIVE(isNat(s(V1))) → U211(isNat(V1))
MARK(U31(X1, X2)) → U311(mark(X1), X2)
MARK(s(X)) → ACTIVE(s(mark(X)))
U721(X1, X2, mark(X3)) → U721(X1, X2, X3)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
ACTIVE(U21(tt)) → MARK(tt)
ACTIVE(U31(tt, V2)) → U321(isNat(V2))
PLUS(X1, active(X2)) → PLUS(X1, X2)
MARK(U52(X1, X2, X3)) → U521(mark(X1), X2, X3)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
U111(active(X1), X2) → U111(X1, X2)
S(mark(X)) → S(X)
MARK(U32(X)) → ACTIVE(U32(mark(X)))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ISNAT(mark(X)) → ISNAT(X)
ACTIVE(x(N, s(M))) → U711(isNat(M), M, N)
ACTIVE(isNat(plus(V1, V2))) → ISNAT(V1)
U211(active(X)) → U211(X)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(U11(tt, V2)) → ISNAT(V2)
MARK(U61(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → ISNAT(V1)
U711(mark(X1), X2, X3) → U711(X1, X2, X3)
U521(X1, X2, mark(X3)) → U521(X1, X2, X3)
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(U12(tt)) → MARK(tt)
U611(mark(X)) → U611(X)
ACTIVE(U61(tt)) → MARK(0)
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
ACTIVE(U51(tt, M, N)) → U521(isNat(N), M, N)
MARK(tt) → ACTIVE(tt)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
U121(mark(X)) → U121(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(U32(X)) → U321(mark(X))
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U21(X)) → U211(mark(X))
U411(mark(X1), X2) → U411(X1, X2)
U711(active(X1), X2, X3) → U711(X1, X2, X3)
MARK(x(X1, X2)) → MARK(X1)
U721(X1, X2, active(X3)) → U721(X1, X2, X3)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
U411(active(X1), X2) → U411(X1, X2)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → MARK(X1)
ACTIVE(plus(N, 0)) → U411(isNat(N), N)
U311(X1, active(X2)) → U311(X1, X2)
U411(X1, active(X2)) → U411(X1, X2)
U721(mark(X1), X2, X3) → U721(X1, X2, X3)
S(active(X)) → S(X)
U321(active(X)) → U321(X)
MARK(x(X1, X2)) → X(mark(X1), mark(X2))
ACTIVE(U51(tt, M, N)) → ISNAT(N)
MARK(U61(X)) → ACTIVE(U61(mark(X)))
U711(X1, X2, mark(X3)) → U711(X1, X2, X3)
U211(mark(X)) → U211(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → U511(mark(X1), X2, X3)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
U111(mark(X1), X2) → U111(X1, X2)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(U71(tt, M, N)) → ISNAT(N)
MARK(U71(X1, X2, X3)) → MARK(X1)
PLUS(active(X1), X2) → PLUS(X1, X2)
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
U511(active(X1), X2, X3) → U511(X1, X2, X3)
U511(X1, X2, mark(X3)) → U511(X1, X2, X3)
MARK(U72(X1, X2, X3)) → MARK(X1)
U711(X1, active(X2), X3) → U711(X1, X2, X3)
ACTIVE(x(N, s(M))) → ISNAT(M)
MARK(U61(X)) → U611(mark(X))
MARK(U52(X1, X2, X3)) → MARK(X1)
U721(active(X1), X2, X3) → U721(X1, X2, X3)
U711(X1, mark(X2), X3) → U711(X1, X2, X3)
MARK(s(X)) → S(mark(X))
MARK(U12(X)) → U121(mark(X))
U511(X1, mark(X2), X3) → U511(X1, X2, X3)
ACTIVE(x(N, 0)) → ISNAT(N)
ACTIVE(U52(tt, M, N)) → S(plus(N, M))
X(X1, active(X2)) → X(X1, X2)
ISNAT(active(X)) → ISNAT(X)
U511(mark(X1), X2, X3) → U511(X1, X2, X3)
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → U111(isNat(V1), V2)
U611(active(X)) → U611(X)
U721(X1, mark(X2), X3) → U721(X1, X2, X3)
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
ACTIVE(U71(tt, M, N)) → U721(isNat(N), M, N)
MARK(0) → ACTIVE(0)
U521(active(X1), X2, X3) → U521(X1, X2, X3)
MARK(plus(X1, X2)) → PLUS(mark(X1), mark(X2))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
U721(X1, active(X2), X3) → U721(X1, X2, X3)
U521(mark(X1), X2, X3) → U521(X1, X2, X3)
MARK(U11(X1, X2)) → MARK(X1)
U411(X1, mark(X2)) → U411(X1, X2)
ACTIVE(x(N, 0)) → U611(isNat(N))
ACTIVE(U32(tt)) → MARK(tt)
U111(X1, mark(X2)) → U111(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
ACTIVE(plus(N, s(M))) → ISNAT(M)
U511(X1, X2, active(X3)) → U511(X1, X2, X3)
U121(active(X)) → U121(X)
X(X1, mark(X2)) → X(X1, X2)
ACTIVE(U52(tt, M, N)) → PLUS(N, M)
U521(X1, X2, active(X3)) → U521(X1, X2, X3)
ACTIVE(U72(tt, M, N)) → PLUS(x(N, M), N)
U111(X1, active(X2)) → U111(X1, X2)
ACTIVE(U11(tt, V2)) → U121(isNat(V2))
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)
ACTIVE(isNat(x(V1, V2))) → U311(isNat(V1), V2)
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U32(X)) → MARK(X)
X(active(X1), X2) → X(X1, X2)
MARK(x(X1, X2)) → MARK(X2)
MARK(U41(X1, X2)) → MARK(X1)
U321(mark(X)) → U321(X)
ACTIVE(plus(N, s(M))) → U511(isNat(M), M, N)
ACTIVE(isNat(x(V1, V2))) → ISNAT(V1)
U711(X1, X2, active(X3)) → U711(X1, X2, X3)
U521(X1, mark(X2), X3) → U521(X1, X2, X3)
MARK(U72(X1, X2, X3)) → U721(mark(X1), X2, X3)
ACTIVE(U72(tt, M, N)) → X(N, M)
MARK(s(X)) → MARK(X)
ACTIVE(plus(N, 0)) → ISNAT(N)
ACTIVE(U31(tt, V2)) → ISNAT(V2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
U521(X1, active(X2), X3) → U521(X1, X2, X3)
MARK(U41(X1, X2)) → U411(mark(X1), X2)
U511(X1, active(X2), X3) → U511(X1, X2, X3)
MARK(plus(X1, X2)) → MARK(X2)
MARK(U11(X1, X2)) → U111(mark(X1), X2)
X(mark(X1), X2) → X(X1, X2)
ACTIVE(isNat(0)) → MARK(tt)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(U71(X1, X2, X3)) → U711(mark(X1), X2, X3)
ACTIVE(isNat(s(V1))) → U211(isNat(V1))
MARK(U31(X1, X2)) → U311(mark(X1), X2)
MARK(s(X)) → ACTIVE(s(mark(X)))
U721(X1, X2, mark(X3)) → U721(X1, X2, X3)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
ACTIVE(U21(tt)) → MARK(tt)
ACTIVE(U31(tt, V2)) → U321(isNat(V2))
PLUS(X1, active(X2)) → PLUS(X1, X2)
MARK(U52(X1, X2, X3)) → U521(mark(X1), X2, X3)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
U111(active(X1), X2) → U111(X1, X2)
S(mark(X)) → S(X)
MARK(U32(X)) → ACTIVE(U32(mark(X)))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ISNAT(mark(X)) → ISNAT(X)
ACTIVE(x(N, s(M))) → U711(isNat(M), M, N)
ACTIVE(isNat(plus(V1, V2))) → ISNAT(V1)
U211(active(X)) → U211(X)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(U11(tt, V2)) → ISNAT(V2)
MARK(U61(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → ISNAT(V1)
U711(mark(X1), X2, X3) → U711(X1, X2, X3)
U521(X1, X2, mark(X3)) → U521(X1, X2, X3)
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(U12(tt)) → MARK(tt)
U611(mark(X)) → U611(X)
ACTIVE(U61(tt)) → MARK(0)
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
ACTIVE(U51(tt, M, N)) → U521(isNat(N), M, N)
MARK(tt) → ACTIVE(tt)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
U121(mark(X)) → U121(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(U32(X)) → U321(mark(X))
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U21(X)) → U211(mark(X))
U411(mark(X1), X2) → U411(X1, X2)
U711(active(X1), X2, X3) → U711(X1, X2, X3)
MARK(x(X1, X2)) → MARK(X1)
U721(X1, X2, active(X3)) → U721(X1, X2, X3)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
U411(active(X1), X2) → U411(X1, X2)
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → MARK(X1)
ACTIVE(plus(N, 0)) → U411(isNat(N), N)
U311(X1, active(X2)) → U311(X1, X2)
U411(X1, active(X2)) → U411(X1, X2)
U721(mark(X1), X2, X3) → U721(X1, X2, X3)
S(active(X)) → S(X)
U321(active(X)) → U321(X)
MARK(x(X1, X2)) → X(mark(X1), mark(X2))
ACTIVE(U51(tt, M, N)) → ISNAT(N)
MARK(U61(X)) → ACTIVE(U61(mark(X)))
U711(X1, X2, mark(X3)) → U711(X1, X2, X3)
U211(mark(X)) → U211(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → U511(mark(X1), X2, X3)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
U111(mark(X1), X2) → U111(X1, X2)
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(U71(tt, M, N)) → ISNAT(N)
MARK(U71(X1, X2, X3)) → MARK(X1)
PLUS(active(X1), X2) → PLUS(X1, X2)
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
U511(active(X1), X2, X3) → U511(X1, X2, X3)
U511(X1, X2, mark(X3)) → U511(X1, X2, X3)
MARK(U72(X1, X2, X3)) → MARK(X1)
U711(X1, active(X2), X3) → U711(X1, X2, X3)
ACTIVE(x(N, s(M))) → ISNAT(M)
MARK(U61(X)) → U611(mark(X))
MARK(U52(X1, X2, X3)) → MARK(X1)
U721(active(X1), X2, X3) → U721(X1, X2, X3)
U711(X1, mark(X2), X3) → U711(X1, X2, X3)
MARK(s(X)) → S(mark(X))
MARK(U12(X)) → U121(mark(X))
U511(X1, mark(X2), X3) → U511(X1, X2, X3)
ACTIVE(x(N, 0)) → ISNAT(N)
ACTIVE(U52(tt, M, N)) → S(plus(N, M))
X(X1, active(X2)) → X(X1, X2)
ISNAT(active(X)) → ISNAT(X)
U511(mark(X1), X2, X3) → U511(X1, X2, X3)
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → U111(isNat(V1), V2)
U611(active(X)) → U611(X)
U721(X1, mark(X2), X3) → U721(X1, X2, X3)
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
ACTIVE(U71(tt, M, N)) → U721(isNat(N), M, N)
MARK(0) → ACTIVE(0)
U521(active(X1), X2, X3) → U521(X1, X2, X3)
MARK(plus(X1, X2)) → PLUS(mark(X1), mark(X2))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 16 SCCs with 47 less nodes.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

X(X1, active(X2)) → X(X1, X2)
X(X1, mark(X2)) → X(X1, X2)
X(mark(X1), X2) → X(X1, X2)
X(active(X1), X2) → X(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


X(X1, active(X2)) → X(X1, X2)
X(X1, mark(X2)) → X(X1, X2)
X(mark(X1), X2) → X(X1, X2)
X(active(X1), X2) → X(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(X(x1, x2)) = (4)x_1 + x_2   
POL(active(x1)) = 4 + (4)x_1   
POL(mark(x1)) = 3 + (4)x_1   
The value of delta used in the strict ordering is 3.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U721(X1, mark(X2), X3) → U721(X1, X2, X3)
U721(active(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, X2, active(X3)) → U721(X1, X2, X3)
U721(mark(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, active(X2), X3) → U721(X1, X2, X3)
U721(X1, X2, mark(X3)) → U721(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U721(active(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, X2, active(X3)) → U721(X1, X2, X3)
U721(mark(X1), X2, X3) → U721(X1, X2, X3)
U721(X1, X2, mark(X3)) → U721(X1, X2, X3)
The remaining pairs can at least be oriented weakly.

U721(X1, mark(X2), X3) → U721(X1, X2, X3)
U721(X1, active(X2), X3) → U721(X1, X2, X3)
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 3 + (4)x_1   
POL(U721(x1, x2, x3)) = x_1 + x_3   
POL(mark(x1)) = 1 + (4)x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U721(X1, mark(X2), X3) → U721(X1, X2, X3)
U721(X1, active(X2), X3) → U721(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U721(X1, mark(X2), X3) → U721(X1, X2, X3)
U721(X1, active(X2), X3) → U721(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(U721(x1, x2, x3)) = (4)x_2   
POL(mark(x1)) = 4 + x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U711(active(X1), X2, X3) → U711(X1, X2, X3)
U711(mark(X1), X2, X3) → U711(X1, X2, X3)
U711(X1, mark(X2), X3) → U711(X1, X2, X3)
U711(X1, active(X2), X3) → U711(X1, X2, X3)
U711(X1, X2, mark(X3)) → U711(X1, X2, X3)
U711(X1, X2, active(X3)) → U711(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U711(active(X1), X2, X3) → U711(X1, X2, X3)
U711(mark(X1), X2, X3) → U711(X1, X2, X3)
U711(X1, mark(X2), X3) → U711(X1, X2, X3)
U711(X1, active(X2), X3) → U711(X1, X2, X3)
U711(X1, X2, mark(X3)) → U711(X1, X2, X3)
U711(X1, X2, active(X3)) → U711(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(U711(x1, x2, x3)) = x_1 + x_2 + (4)x_3   
POL(active(x1)) = 1 + (2)x_1   
POL(mark(x1)) = 1 + (4)x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U611(mark(X)) → U611(X)
U611(active(X)) → U611(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U611(mark(X)) → U611(X)
U611(active(X)) → U611(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(U611(x1)) = (4)x_1   
POL(mark(x1)) = 4 + x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(PLUS(x1, x2)) = (4)x_1 + x_2   
POL(active(x1)) = 3 + (4)x_1   
POL(mark(x1)) = 1 + (4)x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)
S(active(X)) → S(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
S(active(X)) → S(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(mark(x1)) = 4 + x_1   
POL(S(x1)) = (4)x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U521(X1, X2, mark(X3)) → U521(X1, X2, X3)
U521(X1, mark(X2), X3) → U521(X1, X2, X3)
U521(mark(X1), X2, X3) → U521(X1, X2, X3)
U521(active(X1), X2, X3) → U521(X1, X2, X3)
U521(X1, active(X2), X3) → U521(X1, X2, X3)
U521(X1, X2, active(X3)) → U521(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U521(X1, X2, mark(X3)) → U521(X1, X2, X3)
U521(X1, mark(X2), X3) → U521(X1, X2, X3)
U521(mark(X1), X2, X3) → U521(X1, X2, X3)
U521(active(X1), X2, X3) → U521(X1, X2, X3)
U521(X1, active(X2), X3) → U521(X1, X2, X3)
U521(X1, X2, active(X3)) → U521(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 1 + (4)x_1   
POL(U521(x1, x2, x3)) = (2)x_1 + (4)x_2 + x_3   
POL(mark(x1)) = 3 + (4)x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U511(X1, X2, mark(X3)) → U511(X1, X2, X3)
U511(X1, mark(X2), X3) → U511(X1, X2, X3)
U511(X1, X2, active(X3)) → U511(X1, X2, X3)
U511(X1, active(X2), X3) → U511(X1, X2, X3)
U511(mark(X1), X2, X3) → U511(X1, X2, X3)
U511(active(X1), X2, X3) → U511(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U511(X1, X2, mark(X3)) → U511(X1, X2, X3)
U511(X1, X2, active(X3)) → U511(X1, X2, X3)
U511(mark(X1), X2, X3) → U511(X1, X2, X3)
U511(active(X1), X2, X3) → U511(X1, X2, X3)
The remaining pairs can at least be oriented weakly.

U511(X1, mark(X2), X3) → U511(X1, X2, X3)
U511(X1, active(X2), X3) → U511(X1, X2, X3)
Used ordering: Polynomial interpretation [25,35]:

POL(U511(x1, x2, x3)) = x_1 + (4)x_3   
POL(active(x1)) = 1 + x_1   
POL(mark(x1)) = 4 + (2)x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U511(X1, mark(X2), X3) → U511(X1, X2, X3)
U511(X1, active(X2), X3) → U511(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U511(X1, mark(X2), X3) → U511(X1, X2, X3)
U511(X1, active(X2), X3) → U511(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(U511(x1, x2, x3)) = (4)x_2   
POL(active(x1)) = 4 + (4)x_1   
POL(mark(x1)) = 4 + x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U411(X1, active(X2)) → U411(X1, X2)
U411(active(X1), X2) → U411(X1, X2)
U411(X1, mark(X2)) → U411(X1, X2)
U411(mark(X1), X2) → U411(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U411(X1, active(X2)) → U411(X1, X2)
U411(active(X1), X2) → U411(X1, X2)
U411(X1, mark(X2)) → U411(X1, X2)
U411(mark(X1), X2) → U411(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(U411(x1, x2)) = (4)x_1 + (3)x_2   
POL(mark(x1)) = 4 + (4)x_1   
The value of delta used in the strict ordering is 12.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U321(active(X)) → U321(X)
U321(mark(X)) → U321(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U321(active(X)) → U321(X)
U321(mark(X)) → U321(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(U321(x1)) = (4)x_1   
POL(mark(x1)) = 4 + x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U311(X1, active(X2)) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U311(X1, active(X2)) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (2)x_1   
POL(U311(x1, x2)) = (4)x_1 + (4)x_2   
POL(mark(x1)) = 4 + (2)x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(U211(x1)) = (4)x_1   
POL(mark(x1)) = 4 + x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(mark(x1)) = 4 + x_1   
POL(ISNAT(x1)) = (4)x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U121(mark(X)) → U121(X)
U121(active(X)) → U121(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U121(mark(X)) → U121(X)
U121(active(X)) → U121(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(U121(x1)) = (4)x_1   
POL(mark(x1)) = 4 + x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U111(X1, mark(X2)) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(U111(x1, x2)) = (4)x_1 + x_2   
POL(mark(x1)) = 3 + (4)x_1   
The value of delta used in the strict ordering is 3.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U12(X)) → MARK(X)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U11(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(plus(X1, X2)) → MARK(X2)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(x(X1, X2)) → MARK(X1)
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U32(X)) → ACTIVE(U32(mark(X)))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(U61(X)) → ACTIVE(U61(mark(X)))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U21(X)) → MARK(X)
MARK(U32(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U61(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
MARK(x(X1, X2)) → MARK(X2)
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U41(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U32(X)) → ACTIVE(U32(mark(X)))
MARK(U61(X)) → ACTIVE(U61(mark(X)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
The remaining pairs can at least be oriented weakly.

MARK(U12(X)) → MARK(X)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U11(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(plus(X1, X2)) → MARK(X2)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(x(X1, X2)) → MARK(X1)
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U21(X)) → MARK(X)
MARK(U32(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U61(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
MARK(x(X1, X2)) → MARK(X2)
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U41(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
Used ordering: Polynomial interpretation [25,35]:

POL(plus(x1, x2)) = 1   
POL(U61(x1)) = 0   
POL(U31(x1, x2)) = 1   
POL(mark(x1)) = 0   
POL(x(x1, x2)) = 1   
POL(U11(x1, x2)) = 1   
POL(0) = 0   
POL(ACTIVE(x1)) = (4)x_1   
POL(U52(x1, x2, x3)) = 1   
POL(active(x1)) = 4 + (4)x_1   
POL(MARK(x1)) = 4   
POL(tt) = 0   
POL(U41(x1, x2)) = 1   
POL(U32(x1)) = 0   
POL(U12(x1)) = 0   
POL(s(x1)) = 0   
POL(U72(x1, x2, x3)) = 1   
POL(isNat(x1)) = 1   
POL(U51(x1, x2, x3)) = 1   
POL(U21(x1)) = 1   
POL(U71(x1, x2, x3)) = 1   
The value of delta used in the strict ordering is 4.
The following usable rules [17] were oriented:

U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U32(active(X)) → U32(X)
U32(mark(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
x(X1, active(X2)) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U61(active(X)) → U61(X)
U61(mark(X)) → U61(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U12(X)) → MARK(X)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(s(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(plus(X1, X2)) → MARK(X2)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(x(X1, X2)) → MARK(X1)
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U32(X)) → MARK(X)
MARK(U21(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
MARK(x(X1, X2)) → MARK(X2)
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U41(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U21(X)) → ACTIVE(U21(mark(X)))
The remaining pairs can at least be oriented weakly.

ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
MARK(U12(X)) → MARK(X)
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(s(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(plus(X1, X2)) → MARK(X2)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(x(X1, X2)) → MARK(X1)
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U32(X)) → MARK(X)
MARK(U21(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
MARK(U61(X)) → MARK(X)
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
MARK(x(X1, X2)) → MARK(X2)
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U41(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))
Used ordering: Polynomial interpretation [25,35]:

POL(plus(x1, x2)) = 2   
POL(U61(x1)) = 2 + x_1   
POL(U31(x1, x2)) = 2   
POL(mark(x1)) = 0   
POL(x(x1, x2)) = 2   
POL(U11(x1, x2)) = 2   
POL(0) = 0   
POL(ACTIVE(x1)) = (2)x_1   
POL(U52(x1, x2, x3)) = 2   
POL(active(x1)) = 1 + x_1   
POL(MARK(x1)) = 4   
POL(tt) = 0   
POL(U41(x1, x2)) = 2   
POL(U32(x1)) = 2   
POL(U12(x1)) = 3   
POL(s(x1)) = 0   
POL(U72(x1, x2, x3)) = 2   
POL(isNat(x1)) = 2   
POL(U51(x1, x2, x3)) = 2   
POL(U21(x1)) = 1   
POL(U71(x1, x2, x3)) = 2   
The value of delta used in the strict ordering is 2.
The following usable rules [17] were oriented:

U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
x(X1, active(X2)) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(mark(X1), X2) → x(X1, X2)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

MARK(U12(X)) → MARK(X)
ACTIVE(U71(tt, M, N)) → MARK(U72(isNat(N), M, N))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U71(X1, X2, X3)) → MARK(X1)
MARK(x(X1, X2)) → ACTIVE(x(mark(X1), mark(X2)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U11(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(U41(X1, X2)) → ACTIVE(U41(mark(X1), X2))
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(x(N, 0)) → MARK(U61(isNat(N)))
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → MARK(X2)
MARK(U71(X1, X2, X3)) → ACTIVE(U71(mark(X1), X2, X3))
MARK(x(X1, X2)) → MARK(X1)
MARK(U72(X1, X2, X3)) → MARK(X1)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(U51(X1, X2, X3)) → ACTIVE(U51(mark(X1), X2, X3))
MARK(U51(X1, X2, X3)) → MARK(X1)
MARK(U52(X1, X2, X3)) → MARK(X1)
ACTIVE(U51(tt, M, N)) → MARK(U52(isNat(N), M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(x(N, s(M))) → MARK(U71(isNat(M), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U41(tt, N)) → MARK(N)
MARK(U21(X)) → MARK(X)
MARK(U32(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U61(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U51(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U52(X1, X2, X3)) → ACTIVE(U52(mark(X1), X2, X3))
MARK(x(X1, X2)) → MARK(X2)
ACTIVE(U52(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(plus(N, 0)) → MARK(U41(isNat(N), N))
ACTIVE(isNat(x(V1, V2))) → MARK(U31(isNat(V1), V2))
MARK(U41(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, V2)) → MARK(U32(isNat(V2)))
MARK(U72(X1, X2, X3)) → ACTIVE(U72(mark(X1), X2, X3))
ACTIVE(U72(tt, M, N)) → MARK(plus(x(N, M), N))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, V2)) → mark(U32(isNat(V2)))
active(U32(tt)) → mark(tt)
active(U41(tt, N)) → mark(N)
active(U51(tt, M, N)) → mark(U52(isNat(N), M, N))
active(U52(tt, M, N)) → mark(s(plus(N, M)))
active(U61(tt)) → mark(0)
active(U71(tt, M, N)) → mark(U72(isNat(N), M, N))
active(U72(tt, M, N)) → mark(plus(x(N, M), N))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNat(x(V1, V2))) → mark(U31(isNat(V1), V2))
active(plus(N, 0)) → mark(U41(isNat(N), N))
active(plus(N, s(M))) → mark(U51(isNat(M), M, N))
active(x(N, 0)) → mark(U61(isNat(N)))
active(x(N, s(M))) → mark(U71(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U32(X)) → active(U32(mark(X)))
mark(U41(X1, X2)) → active(U41(mark(X1), X2))
mark(U51(X1, X2, X3)) → active(U51(mark(X1), X2, X3))
mark(U52(X1, X2, X3)) → active(U52(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U61(X)) → active(U61(mark(X)))
mark(0) → active(0)
mark(U71(X1, X2, X3)) → active(U71(mark(X1), X2, X3))
mark(U72(X1, X2, X3)) → active(U72(mark(X1), X2, X3))
mark(x(X1, X2)) → active(x(mark(X1), mark(X2)))
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U32(mark(X)) → U32(X)
U32(active(X)) → U32(X)
U41(mark(X1), X2) → U41(X1, X2)
U41(X1, mark(X2)) → U41(X1, X2)
U41(active(X1), X2) → U41(X1, X2)
U41(X1, active(X2)) → U41(X1, X2)
U51(mark(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, mark(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, mark(X3)) → U51(X1, X2, X3)
U51(active(X1), X2, X3) → U51(X1, X2, X3)
U51(X1, active(X2), X3) → U51(X1, X2, X3)
U51(X1, X2, active(X3)) → U51(X1, X2, X3)
U52(mark(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, mark(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, mark(X3)) → U52(X1, X2, X3)
U52(active(X1), X2, X3) → U52(X1, X2, X3)
U52(X1, active(X2), X3) → U52(X1, X2, X3)
U52(X1, X2, active(X3)) → U52(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
U61(mark(X)) → U61(X)
U61(active(X)) → U61(X)
U71(mark(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, mark(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, mark(X3)) → U71(X1, X2, X3)
U71(active(X1), X2, X3) → U71(X1, X2, X3)
U71(X1, active(X2), X3) → U71(X1, X2, X3)
U71(X1, X2, active(X3)) → U71(X1, X2, X3)
U72(mark(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, mark(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, mark(X3)) → U72(X1, X2, X3)
U72(active(X1), X2, X3) → U72(X1, X2, X3)
U72(X1, active(X2), X3) → U72(X1, X2, X3)
U72(X1, X2, active(X3)) → U72(X1, X2, X3)
x(mark(X1), X2) → x(X1, X2)
x(X1, mark(X2)) → x(X1, X2)
x(active(X1), X2) → x(X1, X2)
x(X1, active(X2)) → x(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.